Home > News > Industry News

The purpose of mobile phone holder


The mobile phone stand mainly uses the principle of mechanics to make the flat mobile phone have a support point one by one, which can be placed upright or obliquely on a horizontal object.

There are two main types of mobile phone holders, one is the suction ring pasted on the back of the mobile phone, and the other is the bracket used to place the mobile phone on it. The first method of use only needs to paste the suction ring on the back of the phone, and then release the ring to place the phone. The second type is to directly open the mobile phone holder to 45 degrees, and put the mobile phone on it to use it.

Most of the current car mounts adopt the replaceable fixing frame method, whether you use a tablet or a mobile phone, you can switch at will. It adopts a super-large and powerful suction cup, which can be stably sucked on the windshield, and can also be installed on the air outlet of the car air conditioner and the car dashboard. The support frame is strong and strong, will not shake or fall, and the angle can be adjusted. It can be used on the car or on the table with different clip holders. There are many types of car mounts, in addition to car mounts, there are also bicycle mounts, motorcycles, mobile phone mounts, etc. Of course, these are inseparable from our Sanjia Electromechanical Bending Machine, Pipe Bending Machine, Buckle Buckle Machine, Bending Machine, Compressor, Circle Machine, Embossing Machine, Shearing Machine and other electromechanical equipment.

1. Dashboard suction cup type. As the first generation of mobile phone holder, the disadvantage is that the suction cup is not strong, and the mobile phone is easy to drop; the advantage is that the position of the instrument panel is optional, and you can place it in the most comfortable position;

2. Front suction cup type. Installed on the front windshield, the disadvantage is that it blocks the line of sight and is unsafe; the advantage is the snake rod structure, which is convenient to adjust the angle;

3. Hanging air outlet. Installed at the air outlet of the air conditioner, the disadvantage is that due to different models, the fixed structure and position are limited, and it is impossible to rotate and adjust the angle; the advantage is that it is firmly fixed;

4. Magnetic 360-degree rotating mobile phone holder. Installed on any flat position that is convenient for the driver to operate. The disadvantage is that the magnetism will affect the signal field of the mobile phone, and there will be marks when it is pasted and removed. The advantage is that it is small, flexible, and does not block the line of sight.

5. Silicone or other non-slip brackets have the disadvantages that the direction cannot be adjusted, and the mobile phone is not fixed enough. The advantage is that it is easy to fix and remove the mobile phone.

We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept